Questions

PSA, BGS, SGC, CGC, TAG, and MNT slabs, plus 35pt toploaders and 35pt One-Touch magnetic holders. PSA slabs in a standard GradedGuard bumper have their own hanger too. Each hanger is sized to its holder type, and you pick your types when you order.

Right on the product page. Every display comes with 10 magnetic hangers. Pick up to two holder types and split the ten however your collection runs: five and five, seven and three, whatever fits. We pack them to your spec.

Add a Claw Hanger 5-Pack ($20) in any holder type. Most top-ten lineups use one or two graders, but you can mix as many as you need.

Yes. Raw cards go in a 35pt toploader or a 35pt One-Touch, and both have their own hangers. Thicker cards, like patch or relic cards, need a larger holder, which our hangers don't fit yet. If that's you, email us. Requests decide what we make next.

Both. The hangers hold the holder, not the card, so graded and raw cards from any sport or trading card game work the same way: Pokémon, Magic, Yu-Gi-Oh, and more.

The system is built around standard graded slabs and 35pt raw-card holders. PSA slabs in a standard GradedGuard bumper have their own hanger. Thicker slabs, oversized cards, dual-card slabs, other bumpers (including GradedGuard on other graders or finishes), and thicker toploaders or One-Touch holders are handled case by case. Email info@tendisplay.com with what you have and we'll confirm fit.

Email info@tendisplay.com before you order and we'll tell you what's possible. Each hanger is sized to a specific holder, so we'll confirm fit first.

The hangers hold firm and won't slip on their own. They're tuned to release cleanly when you pull a card to swap it, so there's no prying.

Unlock and open the front, lift out the card or hanger, place the next one, and close it. About ten seconds.

Solid hardwood, UV-filtering acrylic, stainless steel hinges, a keyed zinc-alloy lock, and a magnetic hanger system sized to every major grader. The display arrives fully assembled, and the matching stand slides together by hand. It's made to hang in your home like art, not sit in a closet like storage.

The frame is solid hardwood: solid walnut or solid natural ash. The back panel behind your cards is plywood. No MDF, no particleboard. Most display cases are a printed laminate over particleboard. This isn't.

Two colorways. Solid Walnut comes with a black backdrop and black hangers. Solid Natural Ash comes with a white backdrop and white hangers. Extra hanger packs come in both colors.

The display is 25.7 inches wide, 18.1 inches high and 2.3 inches deep, and weighs about 18 pounds. On its stand it leans back and stands 19.5 inches tall, 14.5 inches front to back, about 20 pounds together.

UV-filtering acrylic. It's lighter than glass and far less likely to shatter.

Your cards sit behind a locking acrylic front. A zinc-alloy keyed lock is the only way in, and two keys are included.

Two keyhole slots are built into the back, and two 1-inch screws are included. We've tested the screws to hold the full weight of the display in standard drywall. For a more secure fit, use drywall anchors (not included). Mark two level points, drive the screws about three-quarters of the way in, and hang the display on the slots. It sits flush and level.

The display arrives fully assembled. The tabletop stand is two pieces that slide together by hand, with two optional brackets and four screws for extra hold.

Our setup guide walks through the hangers, the stand, and hanging it on the wall, step by step with drawings.

That's the point. Ten Display is a gallery for the ten cards that matter most right now, not storage for a whole collection. Swapping a card takes about ten seconds, so the lineup changes as your collection does.

Anywhere in the United States, including Alaska, Hawaii, Puerto Rico, US territories, and APO/FPO addresses. We don't ship internationally yet.

Shipping is charged per display, at a flat rate based on where it's going:

• California: $30 Standard, $45 Expedited
• Western states (NV, AZ, UT, OR, WA, ID, MT, WY, CO, NM): $35 Standard, $85 Expedited
• Rest of the lower 48 and DC: $40 Standard, $95 Expedited
• Alaska, Hawaii, Puerto Rico, US territories, and APO/FPO: $70 Standard, $125 Expedited

Hangers and accessories ship free. Your exact rate shows at checkout. Rates are subject to change as carrier rates change; the rate at checkout is the rate you pay.

Once your order ships, Standard delivery takes 4 to 7 business days. Expedited takes about 2 business days within the lower 48. Alaska, Hawaii, US territories, and APO/FPO addresses take longer. You'll get tracking the day it ships.

Hanger orders arrive within 5 business days of shipping. If you add hangers to a display order, we pack them with your display whenever we can so everything arrives together.

Yes. You can return your display within 30 days of delivery for a refund. It needs to be unused and in its original packaging. We'll email you a prepaid return label, and its cost comes out of your refund. There's no restocking fee.

Email info@tendisplay.com with your order number and we'll send your label and packing instructions. Please keep the original box and protective packaging so the display makes the trip back safely.

Email info@tendisplay.com within 7 days of delivery with photos of the damage and the packaging, and we'll make it right at no cost to you. Please keep the item and all packaging until it's resolved.

Yes. Every display has a one-year limited warranty against manufacturing defects, starting on the delivery date and covering the frame, hardware, and hangers. It doesn't cover normal wear, accidental damage, or misuse. If something's defective, email info@tendisplay.com with a photo and we'll take care of it.

Email info@tendisplay.com. We'll do our best to respond within one business day.